Used in hydraulic and pneumatic control systems; petrochemical, environmental protection, compressed air; inspection of power plant operation, the locomotive brake system; thermoelectric unit; light industry, machinery and metallurgy; building automation, constant pressure water supply system; other automation and detection systems; industrial The process of detection and control; pressure calibration of laboratory. 

 Main technical parameters: 
 Measured medium: gas, liquid and steam 
 Pressure type: Gauge pressure 
 Range: between 60 Mpa ~ 150 Mpa-100KPa-0.6Mpa any optional 
 Output: General: 4 ~ 20mA (two-wire), 0 ~ 5VDC, 0 ~ 10VDC, 0.5 ~ 4.5VDC (three-wire) special: 0 ~ 20mA, 1 ~ 5VDC, 0 ~ 2VDC voltage proportional output, RS485 digital signal 
 Overall accuracy: ± 0.1% FS (range 60MPa), ± 0.25% FS, ± 0.5% of the FS 
 Power supply: 24V Dc (12 ~ 36VDC) 
 Insulation resistance: ≥ 1000 MΩ/100VDC 
 Load resistance: current output: maximum 800Ω; voltage output: greater than 50KΩ 
 Medium temperature: -20 ~ 85 ℃, -20 ~ 150 ° C, -20 ~ 200 ° C, -20 ~ 300 ℃ (optional) 
 Ambient temperature: -20 ~ 85 ℃ 
 Storage Temperature: -40 ~ 90 ℃ 
 Relative Humidity: 0 ~ 95% RH 
 Sealing rating: IP65/IP68 
 Overload: 150% FS 
 Response time: ≤ 10mS